Ask for software of mini board RY3048F (For MicomCar)

Dear Sir/Madame, 

Our company (Renesas Design Vietnam) is owning several Micom Car using old version of CPU board (RY3048F)

which includes H8/3048 CPU. 

I tried to search the support tools & sample software program on www.renesas.com but I cannot find . 

<Q> Would you help to send the full sample workspace of such micom Car (kit05.c or kit06.c ) & download software for loading *.mot into the H8 CPU ? 

Thank you  !

Best Regards

HanNguyen

  • @NoMay: I'd like to include the image of the CPU board of my MicomCar (https://drive.google.com/file/d/1nE5_HRZJOjR9aXkrWRd_kK9c8gDFmZ7g/view?usp=sharing ).  It's nearly same with the link that you sent but I'm not sure that it's the same type or not

  • Hello HanNguyen,

    Thank you for the photo. I found the name of 'HOKUTO DENSHI'. So I think my guess is right.

    To be honest, I'm not familiar with MicomCar, so that I have to know a little bit more about what is 'kit05.c or kit06.c'. (Of course, I can understand that these are software for the board but it isn't enough for me to find the software.)

    Do you have any URLs which help my understanding? For example, URLs of older versions such as kit04.c, kit03.c, and so on. (Moreover, even if such URLs aren't available now, it may help me.) If you have such URLs, please let me know.

    Best regards,
    NoMaY

  • Hello HanNguyen,

    Probably I found it (but sorry for Japanese site). Can you understand how to download?

    www2.himdx.net/mcr/product/download_h8.html

    Best regards,
    NoMaY

  • Dear NoMay,

    Thank you so much for your support !

    I could download the kit05 & kit06 sample software and build them without Error on HEW. 

    But there is still one thing that I cannot download (it's a software supporting download *.mot file to CPU via RS232 cable called CpuWrite.exe ) as this specification on www2.himdx.net/.../renesas_sousa_introduction.pdf

    ===

    3.4.2 RY3048Foneボード書き込みソフトをルネサス統合開発環境に登録
    ルネサス統合開発環境には、書き込みソフトが含まれていません。ここで書き込みソフトを登録します。
    RY3048Fone ボードの書き込みソフトに「CpuWrite.exe」がありますので、これを使用します。

    ===

    As I checked on google , I find this "https://www.hokutodenshi.co.jp/download/driver/3048Fone.zip" . 

    It may relate to "CpuWrite.exe" .

    I tried to run it on Windows 10 but it seems that It cannot run (My laptop is not admin) . I wonder if it could run on Windows 10.  

    <Q> Do you have any suggestion ? 

    Thank you !

    Best Regards

    HanNguyen

  • Hello HanNguyen,

    On my laptop PC running Windows 10, CpuWrite.exe seems to run. Since I don't have the board, I cannot check whether the program can download mot or not, but it seems to try downloading as following screen copy. What happens at your side?

    The program says: Change the switch to write mode then turn on the power.


    The program says: Err:0040 Failed to receive the ACK of the completion of bit rate negotiation.


    Best regards,
    NoMaY

  • Dear NoMaY,

    Thank you for continously sending my the support !

    I could execute the file now (since my laptop is not Admin right, I tried to execute by click "Run anyway" , however the interface seems to be in Japanese and I can't read some strange words since the default font setting of my laptop is English, I may need try to change the font from English to Japanese of Windows 10 by some means.

    Here's the image of the display, I can't detect good/NG with current message box

    https://drive.google.com/file/d/1wfi4Tei8y1I8q8xKfFPzk4aY9oquWolt/view?usp=sharing

    Let me try and come back to this question after then.

    Thank you !

    Best Regards

    HanNguyen

  • Hello HanNguyen,

    I understand that messages aren't readable...

    By the way, I wonder what did you do to download mot file to the cars? (becuse I think that, maybe, now isn't the first time for you to use the cars.)

    For example, did you use E10T(?) or E8a(??) emulator to download mot file to the cars?

    Best regards,
    NoMaY